What did you do to your Jeep today?

[OrangeXJ]

I pressure washed the outside AND inside of the xj and put the doors back on.

Winer

[TeXJ]

Used from Matt... already talking bout it... but wondering if there is a better transmission option for an automatic and 231 case...

From what I've read the the AW4 is a great tranny behind the 4.0L, but heat is a real killer! Put in another and then a tranny cooler and a gauge.

[Weldmen]

I changed the oil and installed a new $40 valve cover gasket. :) I am hoping it stops the drips under the motor.

[XJ408]

changed my ignition coil.....unfortunately that isn't the problem of my starting issue

[OrangeXJ]

Picked up the new long block for my son's xj

[TeXJ]

changed my ignition coil.....unfortunately that isn't the problem of my starting issue

have you checked you NSS?

[XJ4IV]

Got home early today and did a few things on my list... tomorrow I can sleep in a little...
For starters.... I fixed THIS issue
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG_1051.jpg
Then I installed these that I have had LONGER than I had the sliders
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG268.jpg
also replaced that CRAPPY warn plug with a new water tight plug for my wireless setup... now I have a working winch again!
Also installed my 100+ foot cable
can you see my jeep back there???
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG265.jpg

HOLY CRAP!!! it all fit on there, but I cant be sloppy about winding my cable I guess... I suppose I can take out about 20 ft
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG267.jpg

[Weldmen]

Cleaned my plugs and checked the timeing...:rolleyes:

[88AMCOMANCHE]

Put on rear brakes,had to make a hard decision to attach the lower spring to the self adjuster thingy,as opposed to hooking it directly to the Other brake shoe.Worried its hooked to the right place.Seems it should hook to both shoes connecting them,but they had one end of the spring going to the clasp adjuster piece thingy,so thats where i hooked it to.
Then drove it around the yard an hour then tried adjusting E-brake but one cable seems to be binding and doesnt retract all the way causing a slight drag. .....Put it back in teh garage,had enough for one day. Anyone know for sure exactly where that bottom spring hooks to on drum brakes?

[1997_sport]

Got a few offers for it!!!! Though no deals. :( haha

Also took some pictures.

http://i146.photobucket.com/albums/r278/dalesr03nascar/photo10.jpg
http://i146.photobucket.com/albums/r278/dalesr03nascar/photo11.jpg

[Mudderoy]

Got a few offers for it!!!! Though no deals. :( haha

Also took some pictures.

http://i146.photobucket.com/albums/r278/dalesr03nascar/photo10.jpg
http://i146.photobucket.com/albums/r278/dalesr03nascar/photo11.jpg

There is a red/green jeep war (friendly of course) going on here, so it's pretty funny that you show up with a red/green jeep. :wink:

[hookedonxjs]

Got home early today and did a few things on my list... tomorrow I can sleep in a little...
For starters.... I fixed THIS issue
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG_1051.jpg
Then I installed these that I have had LONGER than I had the sliders
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG268.jpg
also replaced that CRAPPY warn plug with a new water tight plug for my wireless setup... now I have a working winch again!
Also installed my 100+ foot cable
can you see my jeep back there???
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG265.jpg

HOLY CRAP!!! it all fit on there, but I cant be sloppy about winding my cable I guess... I suppose I can take out about 20 ft
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG267.jpg
Really cool how you used L metal on the rails! Thanks for taking the time to share your pics.

[jccatt]

Left it at home to give tweety a rest

[cantab27]

There is a red/green jeep war (friendly of course) going on here, so it's pretty funny that you show up with a red/green jeep. :wink:

thought it would have sold,especially with a green tailgate :rolleye0012:

oh i did open the heap up to dry it out.....leaks like a mofo in the rain

[cj4a nz]

painted the air filter housing ........................... then worked out I need to drill 2 more holes :crazy:

[Firemanray]

Yesterday....I put the swampers on my 10" wide Soft 8's, replaced the steering stabilzer, replaced tie rod end, aligned toe in, found my power steering leak and bought new line for it.

[j&d Greens]

We are installing a sound bar over the cargo area, it is out of a 98 Cherokee and has the over head light. Got it for $50 bucks off C.L. (also has Polka Audio Speakers) I hope it sounds as good as the guy said it did before he rolled his Cherokee.:sad0147:

[OrangeXJ]

I'm taking it to the Spring Nationals. The track is about 30 mins from my house. :thumbsup:

[Weldmen]

I tinted my windows today, what do ya think? I think it looks sexy :smiley-laughing021:
It would look better with some XJTalk.com stickers. :rolleye0012:

http://abuncha.biz/pics/tint1.jpg

http://abuncha.biz/pics/tint2.jpg

[Firemanray]

Built a roof rack with intergrated light bar. To dark for pics tonight. Post some tomorrow.

[cantab27]

green jeep nice tints = sex on wheels .......................thanks

[jccatt]

I built disconnect mudflaps. Yesterday I pulled out the front drive shaft and cleaned and greased the cardin joint. Squeak gone. :D

[oderdene]

replaced front coil springs, will test 2-3 days and add one more leaf at rear, if required. now front is higher than rear

[Firemanray]

Heres a pic of the roof rack and the swampers, you will find more pics in my build thread (see signature for link):
http://i223.photobucket.com/albums/dd11/firemanray21/IMG_3594-1.jpg
http://i223.photobucket.com/albums/dd11/firemanray21/IMG_3596-1.jpg

[Mudderoy]

Replaced drop pitman arm with a drop pitman arm.

Re-centered the steering wheel....

[4x4Dalton]

Got new muffler put on and brackets fixed. Now the exhaust dont bounce when I hit a bump.

[XJ4IV]

I rented a baby brother.... I went to the Avis to get a rental for work... all they had was a Galant in the size I was wanting... so I asked if they had anything american and the girl said she would upgrade me for free... I asked what she had and the first words out of her mounth were my favorite... she said ..... a Jeep!
though it was a libby but DAMN its nice inside!

[Mudderoy]

Drove to work this morning and I was having a hard time steering the beast. The steering wheel was very sensitive to movement. I had to change to a lighter touch!

[LizardRunner]

had to take da lizard to the alternator shop. We were going to use a 120 amp cause the owner checked and it was supposed to be a direct fit. an hour of trying to fit it in later I told him to just switch to the 90 amp so I could get home after work. Found out that to fit the 120 you have to modify the brackets by grinding. Now will go to the JY and get a spare set of brackets so I can get a 120 amp and do the modifications pre install but it will now have to wait since the shop charges were 233 total. sure wish the books had mentioned that modification was needed.

[alwaysxj]

installed a new track bar bushing, painted the track bar and...... installed my xj talk stickers. ya buddie finally.
thanks Tony.

[bluedragon436]

Drove it to base to shoot the M16 today... and on my way home it randomly decides to show that it is overheating on the gauge... but yet after starting to drive, it reads back down where it is supposed too... then it reads fine all the way home whether I'm driving or stopped at a light... I am guessing that my temp sensor is going stupid... at least that will be my first change out..

[rugidone]

Got my mid-stiffys all burned in and started on the rockrails, only got the ends capped, but its def. a start. Also found a new hole in my floor....

Pictures to come...shower first...but I felt the need to post here as soon as I got home..

[jccatt]

Driving to the gold coast to watch the anzac test

[bigjim350]

Tried to wash it but was very very very very drunk. So who knows how it turned out

[cantab27]

Driving to the gold coast to watch the anzac test

kiwis by 12........pic James ya gotta get me pics of the action...see some of the rescue members are gonna be there ,ones from quake and Queensland floods....should be a good game...dont post results i can only get delayed game:thumbsup:

[cantab27]

put gas in it,,,now i cant feed the family

[cj4a nz]

Yesterday/last nite...........
fitted air inlet system :D

fitted cover on exhaust stack,someone's compained it wasn't safe.... what is!!

got new muffler then took it back to get one that will fit mite fit this weekend

secured and wrapped a wire in the engine bay

tried to sell a pto........... ain't gone yet!!!!!

went to get rims modified but they can't be modified :bang: rim spacers here I come.............................................. ......

tided up the garage that count????? :cop:

[rguignard]

i washed it

http://i694.photobucket.com/albums/vv303/rguignard001/2011-05-06140411.jpg

it still looks ok from 10 feet lol

[Mudderoy]

i washed it

Blasphemy! How long does it take the seats to dry? :rolleye0012:

[rguignard]

Blasphemy! How long does it take the seats to dry? :rolleye0012:

only a few hours with as hot as it is :D

[Metlic53]

had to take da lizard to the alternator shop. We were going to use a 120 amp cause the owner checked and it was supposed to be a direct fit. an hour of trying to fit it in later I told him to just switch to the 90 amp so I could get home after work. Found out that to fit the 120 you have to modify the brackets by grinding. Now will go to the JY and get a spare set of brackets so I can get a 120 amp and do the modifications pre install but it will now have to wait since the shop charges were 233 total. sure wish the books had mentioned that modification was needed.

i posted on here a little while ago what all was needed to fit the 120 amp. the grinding took me 10 minutes then everything fit easy.

[xj4life2]

Replaced my coolant bottle and then put a fan switch under the hood for the aux fan. Yes I had someone check the wire color for me lol lol

[x714320]

GOT IT OUT FOR A TEST RUN SO FAR , I LIKE IT .http://i54.tinypic.com/jaaz9i.jpg[/IMG[IMG]http://i56.tinypic.com/2h84lsp.jpg

[4x4Dalton]

Drove it to Home Depot and got new front door for trailer. Wife actually got into the Grizzly to go with me used the fancy step stool to get in :D.

[DETOURS]

I made some shock mount brackets........finally.....

http://img.photobucket.com/albums/v649/Detours/5711003.jpg

Then I made some bar pin eliminater style STM's......

http://img.photobucket.com/albums/v649/Detours/5711005.jpg

Then I welded up my new mounts, I'll be adding a base gusset.....

http://img.photobucket.com/albums/v649/Detours/5711008.jpg

Then I installed my rear Bad Apple Fab diff. guard.........finally....

http://img.photobucket.com/albums/v649/Detours/5711010.jpg

Now I need a shower............

http://img.photobucket.com/albums/v649/Detours/blueman-728079.jpg

First time I've worked on the thing in months..............:jail:

[OrangeXJ]

i washed it

http://i694.photobucket.com/albums/vv303/rguignard001/2011-05-06140411.jpg

it still looks ok from 10 feet lol

Damm dude I thought it was a diffrent color

[rugidone]

Removed the back bumper to remove my trailer hitch and broke a bumper bolt lol.

[jccatt]

Cleaned the mud off from last nights run. Took off the back drums and hosed all the grit out and put the stocker wheels back on. Hell I even vacuumed the dirt out from inside.

[Mudderoy]

Cleaned the mud off from last nights run. Took off the back drums and hosed all the grit out and put the stocker wheels back on. Hell I even vacuumed the dirt out from inside.

oooo I bet she feels pretty! :D

[bluedragon436]

Took mine mudding yesterday on my way home, and took it through car wash this morning on my way home thanks to the complaints of a few police officers... (damn kill joys!!) Also installed a small sub, just too add a little bit of depth to my music, and not take up too much room...



Then I made some bar pin eliminater style STM's......

http://img.photobucket.com/albums/v649/Detours/5711005.jpg

I like those bar pin eliminator style STM's!!

[jccatt]

Pretty yes, but got a front vibe, uni hunt again

[801 xj ohh rah]

well i started my lift and the damn freaking leaf bolts took 8 hours to get out

[ice_cold]

Found my no start problem....

http://i26.photobucket.com/albums/c106/ice_cold1959/noname.jpg

[rugidone]

Changed my RMS and inspected the mains.

[Mudderoy]

Found my no start problem....

http://i26.photobucket.com/albums/c106/ice_cold1959/noname.jpg

What is that?

[Metlic53]

Found my no start problem....

http://i26.photobucket.com/albums/c106/ice_cold1959/noname.jpg

Is that the distributor?

[Mudderoy]

Is that the distributor?

You know thinking back on what I read, I bet this is the gear (or what is left of it) at the bottom of the distributor.

[rguignard]

putting a alternator on mine today

[ice_cold]

You know thinking back on what I read, I bet this is the gear (or what is left of it) at the bottom of the distributor.

Yep thats the gear on the shaft of the distributor that runs off the cam shaft and turns the oil pump.
Seems TJ's in the same time line had a factory recall on this sucker.

[msmoorenburg]

gave it a much needed bath

http://i7.photobucket.com/albums/y299/msmoorenburg/IMG_20110510_191621.jpg

[bluedragon436]

Looking good Matt!!

[801 xj ohh rah]

i took everthing off of the front suspension ohhhh yeaaaah almost finished with the lift :p

[rugidone]

Did nothing to mine, but I did have to drive half an hour to go rescue my buddy in a TJ, front track bar bolt sheared off going up a large hill on a main road. (he ended up on the sidewalk)

[cantab27]

swapped out front hubs again:bang:

say hello to my little friend
http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/Image0433.jpg

right up there with my BFH..:D
oh look pool noodles
http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/Image0435.jpg

then i spotted my shocks are gone.....there's red on em , will have to change them..
http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/Image0434.jpg
:rolleye0012:
also notice that when at night and i pull up behind other cars they adjust there rear view mirrors....i just thought is was cause i have a lifted jeep and am bad ass...........well no, one head light was pointing up, so adjusted that and deflated the big jeep bad ass ego:eek:
http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/Image0436.jpg
so yeah good mornings work .....:)

[cj4a nz]

attached new coby muffler
http://i406.photobucket.com/albums/pp150/cj41jeep/jeep%20rebuild/th_IMG_2058.jpg (http://s406.photobucket.com/albums/pp150/cj41jeep/jeep%20rebuild/?action=view&current=IMG_2058.jpg)
but is way too shiny need to get muddy :indifferent0020:
and did the 4 bolts up I couldn't reach,neighbour came over :D
and moved the spare block in to the outside shed now only have 3 things under the jeep and all at the rear of it so I can drive it out without moving half the garage around yeppie :D :D
couple of head lights here for you wayne if you want them
next plan .................................................. .............. move side lights into headlights (add wire) and done replace my indicators with led ones working out what will fit :D this weekend

[cantab27]

couple of head lights here for you wayne if you want them

.
.
.
.
.
.
and one of them there 44s out tne back..:rolleye0012:

[cj4a nz]

.
.
.
.
.
.
and one of them there 44s out tne back..:rolleye0012:
.
.
.
.
.
.
.
. theres 2 out there :wink: :sniper:

[TeXJ]

Yep thats the gear on the shaft of the distributor that runs off the cam shaft and turns the oil pump.
Seems TJ's in the same time line had a factory recall on this sucker.

what time line?

[ice_cold]

what time line?

Was told it was the "later" years, So not completly sure which years.

[4x4Dalton]

Drove it to work and back. Wow now thats the life :mock:

[TeXJ]

drove mine to the neighbor hood walmart store to get some stuff for dinner, then came home...first time to start it a 1.5 weeks :(

[jccatt]

Took off the rear bar so I can start making a custom one. It will double as an air tank.

[KH96XJ]

Replaced the power steering reservoir. No more leaks...so far.

[KH96XJ]

Also, just finished installing my JKS discos finally. Would recommend getting someplace to press out the old studs if you don't have the means to do so.

[801 xj ohh rah]

i jus put in my aa sye and crossing my fingers i didnt forget anything (with my luck i did) so now i jus gotta filleeeer up n hope for no leaks

[BigJeepBigJeep]

Bought it a high lift with alot of accessories

Sent from my SGH-T839 using Tapatalk

[XJ4IV]

Bought it a high lift with alot of accessories

Sent from my SGH-T839 using Tapatalk

thought you were wheelin today???

[jccatt]

Cleaned mud off from TV shoot(adds) for Farm Fantastic comp.

[4x4Dalton]

Finished mountin the roof rack up top and drillin for brackets for Hi-Lift jack on side.

[Mudderoy]

Cleaned my IAC and the rest of the throttle body in the process. Starts up on first try now. We'll see if it stays this way. Seafoam would do the same thing for a couple of days.

[KH96XJ]

Installed my diff guards from Bad Apple Fab.
http://i27.photobucket.com/albums/c169/KH01GTP/rear.jpg

[cantab27]

Cleaned mud off from TV shoot(adds) for Farm Fantastic comp.

movie star jeep
:notworthy:

link to ad when done:thumbsup:

[jccatt]

movie star jeep
:notworthy:

link to ad when done:thumbsup:

The event is in july. I'll keep an eye out for it

[rugidone]

Left my heep at the shop, I'm running this today. MmmMmm TURBO!

http://i76.photobucket.com/albums/j36/rugidone/DSC01126.jpg

Around 300HORSES!

[PolarXJ]

Replaced a ujoint and yoke last night.

[OrangeXJ]

Put the tow bar on it. Geting ready to go camping this weekend.

[CT99XJ]

Resprayed the bedliner, bedlined my center console top and dash center. replaced passenger side TRE on my one-ton. Discovered both LCA brackets are bent from the telephone pole incident... time to take a ride down to Clayton to get some new ones welded on.

[msmoorenburg]

Left my heep at the shop, I'm running this today. MmmMmm TURBO!

http://i76.photobucket.com/albums/j36/rugidone/DSC01126.jpg

Around 300HORSES!

300 is all? j/k i tuned my buddy's and it was (dyno)475 and torq steer made you change your shorts :poke:

[rugidone]

^ LOL, going from a soggy ol' jeep to a 300hp 4cyl car is a huge difference, torque steer is bad enough in this thing...

[bluedragon436]

Left my heep at the shop, I'm running this today. MmmMmm TURBO!

http://i76.photobucket.com/albums/j36/rugidone/DSC01126.jpg

Around 300HORSES!

Not going to lie... as much as I love my Jeep... if I had that in the stable.. I would drive that quite a bit more than my Jeep... but would def. never get rid of my Jeep....

[rugidone]

Its my buddies car, he runs a local auto shop here, this is one of the "company" cars, since my jeep is laid up he let me take it, while he drives an old beat up first gen. neon lol.

[msmoorenburg]

Its my buddies car, he runs a local auto shop here, this is one of the "company" cars, since my jeep is laid up he let me take it, while he drives an old beat up first gen. neon lol.

I owned a SRT4 for about a year and the need for a truck was more :(. here is my beat up 1gn oh and its turboed and 300hp too:D

http://i7.photobucket.com/albums/y299/msmoorenburg/mp71809meet19.jpg

[rugidone]

This is what the green one looked like when he bought it.

http://a1.sphotos.ak.fbcdn.net/photos-ak-snc1/v1742/151/14/738254767/n738254767_1779606_5677.jpg

[oderdene]

had a DW around 65mph :(

[oderdene]

checked and tightened all front end bolts /nuts. Passenger side tie rod was a bit loose. Also pitman arm is loose, needs a washer there.

[XJ4IV]

jeeps 100% legal again... new plates front n back ... lost my personalized ones:sad0147::thumbdown:
Got new insurance
got registration
got legal tires
... now its time for ME to get legal... should be good by wednesday
then I think im gonna sleep in the jeep a few nights to catch up for all the down time:thumbsup: :thumbsup: :thumbsup: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving:

[Mudderoy]

jeeps 100% legal again... new plates front n back ... lost my personalized ones:sad0147::thumbdown:
Got new insurance
got registration
got legal tires
... now its time for ME to get legal... should be good by wednesday
then I think im gonna sleep in the jeep a few nights to catch up for all the down time:thumbsup: :thumbsup: :thumbsup: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving: :driving:

If you want to do the personalized again, I know of a much cheaper alternative.

[XJ4IV]

If you want to do the personalized again, I know of a much cheaper alternative.

do tell.... Ive been pondering the new 7 digit plates...

[cantab27]

took winch out....this means front bar off as well...cleaned solenoids put it back in with out testing ....took winch out .....this means front bar off again.....winch now sits in the bedroom,,may come in handy who knows...nothing like doing something twice for zero result.......

[cj4a nz]

Wayne you need to get the heep dirty :rolleye0012: for the solenoids to pack up spray them with crc or wd 40 ring you later

[jccatt]

Backed into a tree on the trail, had the rear bumper off for fab of the new one :bang:

[4x4Dalton]

Went around roof rack and made sure all bolts were still tight and added a lil bit more security to make sure it dont come off(4 bolts runnin through bottom into rails).

[TeXJ]

used it as a pack mule to haul the new sod, mulch, flowers(the wifes), potting soil...hopefully tonight I can start on my gear install, 4.56's here i come!

[XJ4IV]

Redesigned my roof rack mount... pics to follow after I finish it... THe idea I have may not work but I THINK it will be ok...

[cantab27]

well got something sorted ...aluminum fair-lead sorted...pretty ..
http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/Image0449.jpg

http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/Image0450.jpg

[prcjeep]

FINALLY got TIRES! Traded for rays old Bfg MT's, one was bad, paid 50 for new used one and 30 for mount and balance of the four good ones :)

http://i936.photobucket.com/albums/ad210/prcrawfo/downsized_0528111446a.jpg

[cantab27]

look good on there patrick

[prcjeep]

look good on there patrick

Thanks, It's mainly cuz its green!

[Mudderoy]

Thanks, It's mainly cuz its green!

What about all the carnage, is it fixed?

[XJ4IV]

FINALLY got TIRES! Traded for rays old Bfg MT's, one was bad, paid 50 for new used one and 30 for mount and balance of the four good ones :)

http://i936.photobucket.com/albums/ad210/prcrawfo/downsized_0528111446a.jpg

they grow up so fast these days

[TeXJ]

Green POWA!

[XJ4IV]

mines green underneath it all...Ive heard that its whats on the inside that counts right???
Mines green inside the engine bay... under the carpet Some of the door sills... few other places too I cant think of now... BUT I do have some red in there on the grill and fenders
I guess Im the mediator

[prcjeep]

What about all the carnage, is it fixed?

Carnage fixed... new used bell housing, new used tcase, new used rear drive shaft and three new ujoints

[Marsbar]

Fitted new custom home built rear Diff Cover-Cover/Protector made from the cover off the old diff, so easy anyone could do it & probably have....It's not rocket science

[alwaysxj]

Had to clean snow off of it before I could leave...:bang:
I am never going to get up in them mountains will all thie snow....:sign0181:

[jccatt]

Drove to the station listening to the cardan squeeking

[rugidone]

Did some more frame reinforcing and decided to leave the heep at the shop for another night.

[TeXJ]

installed 4.56's in the rear 8.25, next weekend the d30!

[XJ4IV]

FInished installing the roof rack... Ill snap some pics tomorrow Lets just say I think I may have built a roll cage LOL

[TeXJ]

hey scotters, next sunday I'm going to finish my front d30.

[alwaysxj]

changed out a u joint on the rear Tom Woods DS. now it rides nice.

[cj4a nz]

D30's what wrong with 44's :rolleye0012: or are they hard to come by

[jccatt]

Took the front drive shaft out to re grease the cardan joint:bang::mad: again

[rguignard]

took it swiming

http://i7.photobucket.com/albums/y299/msmoorenburg/downsized950530111809a.jpg

[cantab27]

don't know why y'all rednecks play around that h2o stuff......everything ok with the Heep Rene,,, oh a little explanation please fella........

[rguignard]

don't know why y'all rednecks play around that h2o stuff......everything ok with the Heep Rene,,, oh a little explanation please fella........

well i was driving and just had to wash off the under side of the jeep :smiley-laughing021: no i was going to drive up the side of the beach and it was just a little deeper than i though. she died but i got pulled it out and she started right back up but shes not shifting right on the way home so it setting at home and ill see how shes doing tonight

[KH96XJ]

Ordered some D shackles.

[4x4Dalton]

Nah really Rene was tryin to catch that boat in the pic :rotfl2::rotfl2:

[rugidone]

Painted my rear bumper to keep it from rusting away til I finish it, cleaned up my frame stiffeners and coated them, also installed a hood strut to eliminate the stock prop rod.

[bigjim350]

took it swiming

http://i7.photobucket.com/albums/y299/msmoorenburg/downsized950530111809a.jpg

They should use that in a ad on why not to drink and drive. :bang:

[cantab27]

well i was driving and just had to wash off the under side of the jeep :smiley-laughing021: no i was going to drive up the side of the beach and it was just a little deeper than i though. she died but i got pulled it out and she started right back up but shes not shifting right on the way home so it setting at home and ill see how shes doing tonight

salt water................:comfort:

flush the trans mate,,,,,,and do all ya other fluids..........
snorkel time.....oh and check and clean ya winch or end up like mine ,,,sick:D

[XJ4IV]

OK so the method I wanted to do on the roof rack proved to be VERY beneficial...
Here are some pics of HOW I installed it

http://i1133.photobucket.com/albums/m590/XJ4IV/IMG360.jpg
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG361.jpg

Also I named it today... I had these stickers made while it was still black and since we are AGAIN moving I decided rather than toss $20 in the trash Id go ahead and place em on the jeep

http://i1133.photobucket.com/albums/m590/XJ4IV/IMG359.jpg

Also decided to go black on the rear bumper... kinda ties the whole two tone together

http://i1133.photobucket.com/albums/m590/XJ4IV/IMG362.jpg

[bigjim350]

Like the Idea scott. Can see tons of uses for that on that on the inside. The only thing I would do is weld a cap on the end of it.

[XJ4IV]

on the OUTSIDE I plan on welding a 1.5 inch pipe as a tree slider. Seen many of em but cant find em on google... basically a slider for your roof line...

[Mudderoy]

Like the Idea scott. Can see tons of uses for that on that on the inside. The only thing I would do is weld a cap on the end of it.

I agree and it would be a really good idea to wrap that in foam. Neat place to hang the "hold on" handles.

http://4wheelonline.com/Images/CategoryImages/GrabHandles.jpg

[rugidone]

I watched a brand new chrysler 300 get friendly with my jeep while I was at the insurance office, backed right into the front of my jeep!

[LizardRunner]

and how did the 300 fare? I know you probably only need paint.

[rugidone]

300 had a nice crease in the top crease of the trunklid, cant even tell where they hit me..

Wish I had a camera lol, my phone was at work.

[BigJeepBigJeep]

I owned a SRT4 for about a year and the need for a truck was more :(. here is my beat up 1gn oh and its turboed and 300hp too:D

http://i7.photobucket.com/albums/y299/msmoorenburg/mp71809meet19.jpg

I've been on the hunt for a nyg 1st gen or an acr in any color...

Sent from my SGH-T839 using Tapatalk

[XJ4IV]

here is what Im gonna do to the outside... but Ya'll know me... my design will be more pleasing to the eyes
http://cdn.shopify.com/s/files/1/0016/5012/products/DSCF1134_large.jpg?0

[BigJeepBigJeep]

That's pretty cool.

Today I removed my rear window and roof rack in preparation for the paintjob. Can't decide on a color. I need something appealing to me and to a possible buyer, jic the jeep sells.

Sent from my SGH-T839 using Tapatalk

[Natebub]

Hey got a question. When I run my A/C I get a kinda squealing noise thats intermittent. Only when I run my A/C,,,,when I switch it to Fan it stops right away. The sound is in the dash though not under the hood.......I hurts your ears and it keeps going most of the time until I switch it to fan real quick then turn it back to A/C. Any Ideas??? Thanks.

Nate

[XJ4IV]

I almost lit the somebitch on fire today... damn water pump going bad... removed the t-stat... not a bad idea for summer time.... tomorrow gets a new pump... courtesy of autozone lifetime warranty

[cantab27]

mate lost his tj,,car pulled out, may get totaled yet,,,,frt diff pushed back, arms bent shocks gone ,tc leaking oil bad ...and that was just a quick look..

http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/Image0466.jpg

http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/Image0468.jpg

[jccatt]

Made a rear bar and put my new rear lights on.

http://i1216.photobucket.com/albums/dd364/briscatt/Mods/P1020657.jpg

[XJ4IV]

Well my jep got LOTS of attention yesterday... so much in fact that I had to wait til today to post it all
first off yes it FINALLY got a water pump replacement... though when I removed the old one it seemed to be in proper working order :hmmmm2:
oh well Also replaced a tranny line and lower radiator hose in the same movement...
Later I decided it was time to finaly wire in the rear doors again since the doorless conversion
got some "build your own" plugs at a local computer store
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG372.jpg
these get stripped ends
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG370.jpg
this plug is for the dome light... when your doors are off just unplug this one and the dome light wont turn on
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG371.jpg
and there you have it!
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG373.jpg
then moved on to the light installation for my roof rack... summers coming fast and night wheelin is a MUST
so I scrounged up these lights that I stockpile at my house since they aer DIRT CHEAP at $14 a pair and metal housing with glass lense the heat of the lights wont hurt em any
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG374.jpg
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG375.jpg
then again I got two pieces of unistrut from my recycle collection and went to measuring
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG376.jpg
one side mounted up
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG377.jpg
other side finished
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG378.jpg
but at this point I didnt like the gaps between them so I moved the inside ones outboard a little bit
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG379.jpg
so here are the details, the outer ones that are standing on their sides are 100 watt PIAA bulbs and I can rotate those 180 degrees fairly easily.
the others are all 55 watt northern tool specials however if looking closely at them the upper row of light point slightly upwards and the lowers point slightly downwards.
I have to go buy a few bolts today and a heavy duty switch for them and I should be good to go late today!

[OrangeXJ]

here is what Im gonna do to the outside... but Ya'll know me... my design will be more pleasing to the eyes
http://cdn.shopify.com/s/files/1/0016/5012/products/DSCF1134_large.jpg?0

If I don't quite laying mine on it's side I'm going to need one of those.

Popped most of the dents out of the door.

[BigJeepBigJeep]

Cut the back roof off and started painting :)

Sent from my SGH-T839 using Tapatalk

[XJ4IV]

Cut the back roof off and started painting :)

Sent from my SGH-T839 using Tapatalk

uhhhh PICS and a writeup please!!!!

[cantab27]

Cut the back roof off and started painting :)

Sent from my SGH-T839 using Tapatalk

no pics ,,,didnt happen chris.......................:D:D:D:D:D

[rugidone]

mate lost his tj,,car pulled out, may get totaled yet,,,,frt diff pushed back, arms bent shocks gone ,tc leaking oil bad ...and that was just a quick look..

http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/Image0466.jpg

http://i469.photobucket.com/albums/rr52/cantab27/jeepin%20and%20bits/Image0468.jpg

Buddy of mine has an 05 with a similar accident sitting at the shop right now, but when it was hit it split the transfercase.

[cantab27]

yep thats what its done to that one.......might steal the 44 out of it...wounder if they would notice.....he now has 2 broken tj both white...the green xj dd still rolls but

[BigJeepBigJeep]

Ha! It happened. Jim and possibly rene have seen it! I fcked up and wiped with paint thinner instead of alcohol so when I started to lay my first coat it all ran off haha. So I decided to go wheeling and ended up breaking and axle and housing so bad the jeep jerked to a complete stop and now I don't know what to do.

Same hole fcked jims radiator. Damn that hole :(

Sent from my SGH-T839 using Tapatalk

[LizardRunner]

bought da lizard some seafoam today.

[Firemanray]

Installed GC fan clutch, new power steering hose, 4 offroad lights on the roof rack.

[bigjim350]

Yep as bigjeepbigjeep said, I busted my radiator. Waited for my "buddy" for 3 hrs, and never got a hold of him. Limped it to the walmart around the corner, and waited for my wife to get off work at 7. Wife went home grabbed my tow bar, then ran out of gas on the way. Her dad brought her some gas, and she was on the road again. She gets with in 10 miles from me, and the damn road is closed cause of a tornado that went through. Well she finally finds a way around comes and picks me up. Just now got home at 10:30, busted my rad at 3pm. shittyest day wheeling ever.

[cantab27]

dude ,,feel for ya.....may have been quicker to call me...

[XJ4IV]

damn... I helped Texj install the 4.56 gears on his XJ.... didnt do anything to mine though... no worries

[TeXJ]

Yey! I have 4.56s and locked front and rear! lock right in the front and a no-slip in the rear. I'm on 33s. So far I'm loving having a vehicle that can once again keep up with traffic during acceleration.

[XJ4IV]

You oughta take mine for s spin with these injectors... after everything Ive done so far to the jeep... those are the best performance upgrade Ive done to it

[steph74]

not exactly done today, but since the days are getting warmer, I have a lot of little things to do....
1/ I fixed the A/C, air etc... well was just the fuse that was melted ;)
2/ I used the cut and fold method to make my rear fender well more open
3/sanded, primed and bedlined the hitch receiver, got new bolts and it is ready to be put back on (after I change the rear leafs bushing)

[TeXJ]

forgot to add, put a ZJ v8 tie rod on too,

still need to do the alignment on the front end.

[toebee97]

Went to the store this morning and my water pump ended up with diarrhea. At the halfway point replacing it, having a couple beers while I wait for the gasket to cure.

[LizardRunner]

set up an appointment for da lizard to get the alternator replaced, again. eventually we'll get a good one in there. lol

[Weldmen]

Well I did this yesterday in 102* weather. Checked all the fluid levels and lubed all the hings and joints. How do ya like my shade tree? Its my Polish garage.

http://www.abuncha.biz/pics/tent.jpg

[vwfoolwhy]

Did Front Brakes couldn't do the Rear because the drums wont come off, then found the MC leaking into the booster.:bang:

[vwfoolwhy]

I reinstalled my rear bumper for the first time in 4 1/2 years.:D

[XJ4IV]

figured out the cooling issue... replaced the castle nut on top of the pitman arm... thats about it

[XJ4IV]

figured out the cooling issue... replaced the castle nut on top of the pitman arm... thats about it

that was two different things.... that I fixed... the bad castle nut was NOT causing a cooling issue.... just wanted to clear that up

[XJ4IV]

Well I did this yesterday in 102* weather. Checked all the fluid levels and lubed all the hings and joints. How do ya like my shade tree? Its my Polish garage.

http://www.abuncha.biz/pics/tent.jpg

shade tree kinda needs to move to provide shade for where youd be standing...

[cj4a nz]

drilled yet more hole's in the tub............. these are for the tie down points for the A frame,to stop it moving when I actually use it !!

[rugidone]

Bought mine a house lastnight, even though it can't live in it, it can tow it places.

http://img1.classistatic.com/cps/kj/090811/867r8/9717n63_20.jpeg

Vintage.....

[Mudderoy]

I reinstalled my rear bumper for the first time in 4 1/2 years.:D

I'm surprised you didn't get rear ended a day before you got it back on! :smiley-whacky119:

[LizardRunner]

da lizard is still at the alternator shop, it has taken to eating diode packs apparently.

[saar]

Hi,

After a long time (too long...)
here is what I did:

http://www.pic.co.il/Files/0349364E2C3945329508FE05D26F4BCC/norm_6D37F0509E2241F48DFDD747E4D3FC15.JPG

http://www.pic.co.il/Files/0349364E2C3945329508FE05D26F4BCC/norm_63C200B5CC2A41E7B30B0B65362EA035.JPG

Finally I replaced my rear leafs bushings. no more "bangs and booms" from behind :-)

Saar.

[jccatt]

Greased front cardan and reinstalled front drive shaft after two weeks. Jacked exhaust off floor pan at the front, by by vibration:sniper:, and them went to the mud hole down the roaf and got it dirty. :D

[Adrenalinejunky]

Replaced the turn signal switch. Now I have a left blinker again and not just hazard lights...

[LizardRunner]

drove it fast and put it away wet.

[gearheadette]

thought about it

[Adrenalinejunky]

installed an air freshener today

[jccatt]

Connected my android phone to the obd via bluetooth

[OverEasy]

Started it and actually drove it up the street. I can't remember the last time I drove it.

[kennzz05]

Connected my android phone to the obd via bluetooth

How does one do that where do u get the wire and what info does it provide I just got a srt8 grand Cherokee and want something that could record 0-60 times and things of that nature thanks

[greeno]

washed it in the bus wash at work

[Marsbar]

I walked out to the truck, run the tape measure over it & ordered the steel for the Rock Sliders & Bash Plate mounts + Low Profile Transmission Mount.......Must be done for July17th Glasshouse Mountains trip

[torque]

Gaver her the old tune up last night, going home to do the seafoam and oil change and transmission tonight and troubleshooting the magical cooling system.

[Mudderoy]

Changed tstat,lower hose, spark plugs.
Put front license plate holder on from my old 98 bumper.
added a bug deflector...

https://lh3.googleusercontent.com/-781C-YS5mvU/Tf0e9EaF_zI/AAAAAAAAA8A/qxFGlVLSZwA/s720/2011-06-18%25252016.55.01.jpg

[cantab27]

drove it through the shit again,,,our mains roads are like wheeling at the moment..notice a clicking noise from the back ... had a lookers....so ordered one of these

http://www.offroadspecialties.co.nz/node/89

for once something that didn't cost a arm or leg.......

one day we will wheel again..............

[bigjim350]

Put in a 2 row radiator, and a aux tranny cooler. Now it runs warmer than it did with the 1 row raditator.....figures.

[XJ4IV]

drove it through the shit again,,,our mains roads are like wheeling at the moment..notice a clicking noise from the back ... had a lookers....so ordered one of these

http://www.offroadspecialties.co.nz/node/89

for once something that didn't cost a arm or leg.......

one day we will wheel again..............

we get those here for $13 USD... Sorry mate... and the Spicer ones are about $18

[XJ4IV]

How does one do that where do u get the wire and what info does it provide I just got a srt8 grand Cherokee and want something that could record 0-60 times and things of that nature thanks

download "torque" from the android market... then you gotta get the Bluetooth OBDII ... I found a few on eBay but the cheapo ones dont last very well, you need to opt for the 90$ one! I know what your thinking "might as well get a real scanner" but with the bluetooth setup you can do more than the scanner can!

[cantab27]

we get those here for $13 USD... Sorry mate... and the Spicer ones are about $18

yeah but we got earthquakes,y'all ain't....:rotfl2::rotfl2:

[cj4a nz]

struth mate we got lots on the shelf at wk i should know I put them there!!!!

[cantab27]

struth mate we got lots on the shelf at wk i should know I put them there!!!!

well spares are good ,,order me one

[oderdene]

heard abnormal jingling like sound from front, after opening front diff I've seen this

http://1.bp.blogspot.com/-isyTDjW-Q0I/Tf3una0mNwI/AAAAAAAABoc/XKLUNyQbTF4/s320/Photo-0057.jpg

bigger image here (http://1.bp.blogspot.com/-8k7KBUj37is/Tf3sQm9GgiI/AAAAAAAABoY/bXiBVJgpXVk/s1600/Photo-0057.jpg)

what I check next and how hard to fix it?

[Mudderoy]

heard abnormal jingling like sound from front, after opening front diff I've seen this

http://1.bp.blogspot.com/-isyTDjW-Q0I/Tf3una0mNwI/AAAAAAAABoc/XKLUNyQbTF4/s320/Photo-0057.jpg

bigger image here (http://1.bp.blogspot.com/-8k7KBUj37is/Tf3sQm9GgiI/AAAAAAAABoY/bXiBVJgpXVk/s1600/Photo-0057.jpg)

what I check next and how hard to fix it?

Bad bearing, spacer?

[oderdene]

guess jingling is worn pinion bearing, but not sure. it jingles before start moving and before stopping, at high speed gone.

want to order master rebuild kit, don't know kit number, quadratec says- 30E-MASKI; :(

[rugidone]

Smashed another taillight...same tree as last time.
http://hphotos-snc6.fbcdn.net/257153_10150211407828693_508043692_7461824_6864514 _o.jpg

[jccatt]

Smashed another taillight...same tree as last time.
http://hphotos-snc6.fbcdn.net/257153_10150211407828693_508043692_7461824_6864514 _o.jpg

Ya gota extend that rear bar sideways. Altough a tree might still get past :-(

[greeno]

Smashed another taillight...same tree as last time.
http://hphotos-snc6.fbcdn.net/257153_10150211407828693_508043692_7461824_6864514 _o.jpg

mmmmm we have them over here to lol

[ice_cold]

same tree? Time for a chain saw......

[rugidone]

The trail is one of those runs where you come up to a tree line, pick two trees you think you can fit through, then when your past those, you do the same thing for the next 2kms up and down hills. They call it The SWB (short wheel base) for a reason, I also folded in the sheetmetal from my drivers mirror, apparently it doesn't pivot like the pass side.

Buddy behind me in a TJ couldn't understand how i was squeezing around the 90deg corners, cause he had to reposition multiple times and my heep just kept slipping through.

[jccatt]

Put my stocker tyres on an put the maxxis in the shed for a sleep.

[jccatt]

Bought some struts for the tailgate. Hurry up postman. No more smack on the head.

[toebee97]

Finally got around to replacing the serpentine belt. Wanted to do it when I did my water pump last week, but oh well. It's amazing how many little problems can be fixed by just replacing that belt. Idles better, runs cooler, and alternator is running almost 14 volts now.

[bluedragon436]

Thought about it.. researched some parts that I would like to pick up for it, once I get back home to it!!

[greeno]

Pulled one locker out of my rear 44 and put a new one in

[TeXJ]

drove it all day, tues., the new gears are really loud...

[jccatt]

Got some new struts for the rear door. No more door closing on my head while fosicking for spares to fix Marsbars xj on the trail :-)

[XJ4IV]

WISHED it was with me!!! I need an escape route!

[hookedonxjs]

Got some new struts for the rear door. No more door closing on my head while fosicking for spares to fix Marsbars xj on the trail :-)
I don't know how many times I hit my head before buying new ones...now you got to be careful you move your head back when it is opened!!!

[TeXJ]

WISHED it was with me!!! I need an escape route!

hows it going?

[XJ4IV]

VERY tired of not having my OWN car around! when I need to get away from the BS

[TeXJ]

VERY tired of not having my OWN car around! when I need to get away from the BS

You miss the turbo 5spd dont ya! :D

[XJ4IV]

You miss the turbo 5spd dont ya! :D
Shhhhhh don't tell anyone!!! :thumbsup:

[XJ4IV]

well since I re wired the whole dang jeep and lost some of the carpet in the burn damage I decided to bedline the interior... well the front 2/3 ...
here are the pics I got late last night with my phone
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG420.jpg
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG421.jpg
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG422.jpg
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG423.jpg
Ill get better pics today when I apply the next two coats

[Mudderoy]

Replaced u-joints in the front drive shaft. We'll the two that are closet to the transfer case. The other one was changed a few years ago.

[jccatt]

More work on the rear bar.

[XJ4IV]

finished the bedlining inside of MINE
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG427.jpg
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG425.jpg
then I re-worked the gears on Texj's XJ... the installer put WAY too much torque on the carrier bearing caps thus making the wheel VERY resistant to rotation. all in all his XJ should be GREAT and pretty much unstoppable with front n rear lockers and 4.56 gears
Also we went to freebirds for a bite to eat and I noticed they had a little thing where people make sculptures out of foil .... my creativity got a little carried away so I created this
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG428.jpg
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG430.jpg
I opted for a wrangler cause then folks would get that it was a jeep... some sheltered people dont understand the fact that there are other "real" jeeps out there!

[KH96XJ]

Dropped mine off at A/T Fab to get the gears and the detroit locker for the rear put in. Will be a little bit of a wait since they are backed up on work, but I'm not in a hurry.

[jccatt]

Bought mine a Spartan locker for the front. Hurry up UPS.:-)

[TeXJ]

finished the bedlining inside of MINE
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG427.jpg
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG425.jpg
then I re-worked the gears on Texj's XJ... the installer put WAY too much torque on the carrier bearing caps thus making the wheel VERY resistant to rotation. all in all his XJ should be GREAT and pretty much unstoppable with front n rear lockers and 4.56 gears
Also we went to freebirds for a bite to eat and I noticed they had a little thing where people make sculptures out of foil .... my creativity got a little carried away so I created this
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG428.jpg
http://i1133.photobucket.com/albums/m590/XJ4IV/IMG430.jpg
I opted for a wrangler cause then folks would get that it was a jeep... some sheltered people dont understand the fact that there are other "real" jeeps out there!

:woot: Thanks Scotters!!!

I helped on the foil wrangler...

[rugidone]

Took the front doors off, drove around town just waiting to get pulled over...had 4 ppl ask me what happened to my doors :S

[alwaysxj]

fabed up a cb antenna mount and ran the cable. now to hook it all up...

[cantab27]

fabed up a cb antenna mount and ran the cable. now to hook it all up...

where did you mount it steve

[alwaysxj]

where did you mount it steve

it is mounted to the rear tail light, I will snap a pic when it is all painted and hooked up.

[BigJeepBigJeep]

I drove mine from one side of the yard to the other.

Sent from my SGH-T839 using Tapatalk

[Marsbar]

Went for a drive in 'BAD BLU' thanks to Greeno dropping in & fitting the replacement Steering Box yesterday, Thanks Mate........:wink:

[Mudderoy]

1998 - Temp fix of electric door locks, got them locking again
1999 - Hooked up the drive's side door lock (thing you put the key in) to the door lock.
Took out the space saver spare tire and replaced it with full size spare
Got old light gray tire cover and covered the full sized spare

[jccatt]

Went for a drive in 'BAD BLU' thanks to Greeno dropping in & fitting the replacement Steering Box yesterday, Thanks Mate........:wink:

Cool your mobile again Marsbar

[XJ4IV]

NOT A DAMN THING.... miss my jeep

[greeno]

No prob's mate have fun

[jccatt]

I tracked my diff lock on USPS and its on the plane from Chicago :D

[XJ4IV]

Put my bid in for my rear 5.13 gears... all that's left is drive shafts n tires....

[Mudderoy]

I checked the 1999 this morning to see if there was coolant in the overflow, it was empty, so I filled it up. No over heating issues but the low overflow bottle is somewhat concerning. I'll check it again in a few days.

[greeno]

got some beadlocks for her :)

[prcjeep]

replaced the blowwn out tire I had from last weekend and mounted a used BFG Mud terrain... Going to pick up some new KC slim Hilights this afternoon to put on my Detours A-Pillar brackets

[Mudderoy]

replaced the blowwn out tire I had from last weekend and mounted a used BFG Mud terrain... Going to pick up some new KC slim Hilights this afternoon to put on my Detours A-Pillar brackets

Good lord man, you should give those a-pillar mounts to someone that will use them! :out: :D

[prcjeep]

Good lord man, you should give those a-pillar mounts to someone that will use them! :out: :D

Haha! I know... I'm finally getting the lights I wanted and will be marking up and for drilling and install tonight.
On another note... Do you want a BFG AT 30x950 spare? It's down to the tread indicators on the white wall side but is just fine otherwise, just had it unmounted today.

[Mudderoy]

Haha! I know... I'm finally getting the lights I wanted and will be marking up and for drilling and install tonight.
On another note... Do you want a BFG AT 30x950 spare? It's down to the tread indicators on the white wall side but is just fine otherwise, just had it unmounted today.

Hey thanks, but I've learned my lesson about giving my wife bald tires.

[Mudderoy]

Received and installed the vacuum gauge and Viair air pressure gauge. The vacuum gauge is hooked up but I don't have anything for the air pressure gauge yet. I got it mainly to fill the hole in the a-pillar pod. :D

The Sun vacuum gauge isn't zeroed so now I get to see about returning it and getting a replacement. It does work it's just about 5 off.

Installing the pod the other day I shorted out some of the wires running from my over head switchbox, so I fixed that while I was working there.

[msmoorenburg]

installed the factory front skid and a radio for some tunes

[afbond03]

Replaced the brake booster, Yay no more hissing sound. Also topped off the Transfer case.
Still need to find the energy to replace an upper control arm bushing.

[oderdene]

replaced shocks and oil changed

[TeXJ]

Replaced the brake booster, Yay no more hissing sound. Also topped off the Transfer case.
Still need to find the energy to replace an upper control arm bushing.

i just found out my upper driver side, axle mount is bad.... :mad:

[jccatt]

I opened the Spartan locker box and told my Jeep it was getting an upgrade. :modpower:

[4x4Dalton]

Installed a homemade snorkel on XJ. Will post some pics later this evenin.

[LizardRunner]

Went out and burned up almost all the gas. didn't find any mud but did manage a good coat of dust.

[jccatt]

Installed a homemade snorkel on XJ. Will post some pics later this evenin.

Sweet keen to see the pics bear

[greeno]

put in a set of ironman control arms