Do you still have the plastic bottle mounted on the passenger side firewall? If you do then put the rear up on ramps and then pull the temp sender from the rear of the head on the drivers side. Fill the bottle until you have nothing but coolant coming from the sender hole. Put the sender back in and get the Jeep back on level ground and fill the plastic tank to the fill line and you are done.
I used teflon pipe tape on the threads of the sender but you can use other stuff to seal the threads.

As for the vacuum lines mine has been so altered that you wouldn't gain much from a pic of mine. The OEM was color coded but mine have all been replaced by black so they would be hard to see in a pic anyway.