Welcome drew91xj!!!

[4.3LXJ]

Welcome drew91xj, Glad you have joined xjtalk!

How did you find us? Where are you from?

Check out "Announcements" "How to post an image" for help posting images.

[drew91xj]

i grew up in fremont mi and now live in sparta. i seen a link to this site on cherokeeforum while i was cruising around there the other day.
i have a 93 2dr 6" lift dana 44, fullwidth 8.8 5.13 gears welded rear detroit trutrac front, long arms, custom bumpers with front winch.
i also have wating in the yard a rust free 96 that was previoiusly comp cut in the rear with the gas tank moved to rear cargo area, will be swaping everything over somtime in the future from the 93, rebuild will include 37" truxus mt's or iroks shackle relocation via hd offroad eng along with there 1/4" rocker skids and possilbby 1-2 " more lift, and also redo the crossmember install sye and make the belly flat again

[4.3LXJ]

Sounds cool Drew. Got any pics?

[Mudderoy]

Welcome drew91xj, you are xjtalk's 1000th member!

[cantab27]

x2 with the pics and welcome mate

[drew91xj]

ill try and get pics lil later there on my camer and have to upload them....1000th member huh does that come with a sticker (hint hint) lol

[drew91xj]

these were takin befor my fullwidth swap and my long arms dont have any wheeling pics yet with the fullwidths

[4.3LXJ]

Hey Drew, got me a two door too. Also heading for full widths. Have the rear axle as well as the lockers for the front and rear. Need to come up with the front and a few goodies for it and it will be a go.

[drew91xj]

yeah i love my fullwidths so far plaing in the yard anything i point and try and drive up it walks right up it. my front is a 77 ford d44. 77 was the last year i believe for the weld on wedges that need to be removed to mount your brackets. as far as brackets i used ballistic fabs xj/tj coil/shock/control arm mounts and rustys upper mounts. rotated everything 10* to keep the LA flat with the axle tube, nothing hangs below, but that put my coils at a funny pitch way forward so i need to shim the mount some how.

[4.3LXJ]

Drew

I checked out the one piece mounts. If you rotated everything like that, how is your castor angle? Just trying to be helpful.

[cantab27]

nice xj , thanks for pics

[drew91xj]

well i didn't do the actual set up but i believe the caster was set to what ever then just the mounts them selfs were rotated not the actual axle, the knuckles sit pritty flat on the top being they are flat tops so i believe the caster is within spec. it drives down the road decently i would be comfortable driving the 10-15 min drive to town and back with out a problem and probly further. i dont think it would be highway worthy but thats what i got a flat tow setup and tow rig for.