I want to remove my cruise control system. No control cable in steering column, probably removed before or cut. Please tell me which items should be removed and which cables can be cut?
Tapatalk is active for this site! Just go to your phone's store to download and install.
I want to remove my cruise control system. No control cable in steering column, probably removed before or cut. Please tell me which items should be removed and which cables can be cut?
'91 XJ Limited | 4.0 H.O. I6 | AW-4 | NP242J | D30 | C8.25 | BFG KM2 33x10.50x15 | front winch bumper ...
Great,
first find under the dash, the control box. it looks like the picture (yellow-box)
the only wire what is connected to the wiring of the XJ is the white wire (port 7 ignition) (goes to the fusebox)
The Gray and blue wire (port 2 and 3) goes to the speed sensor.
port 5 (brown-wire) and port 10 (yellow) and port 14 (green) suppose to go to the multifunction lever by the steering wheel.
the 6 other wire goes to the servo (under hood)
from the multifunction lever goes a blue wire to an in-line fuse (pink) and stop light switch.
it is very simple,
if you wish i do have a diagram, only it is an PDF, and i do not know how to upload this.
Thomass
There is no control cable. Just a wiring harness. There is also a couple of wires going to the speedo sensor on the cable under the dash. The actual mechanism looks like a can with a cable coming out of it. Remove it and plug the vacuum line to it.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks