Re: Help With Power Locks
This is a situation where you need to pull the door panels and start checking wires and such. If you don't have a volt meter, a test light and jumper wires will help. One thing to start with is see if your locks are gummed up. The grease looses some of its lighter fluid over time and gets stiff. Some penetrating oil can free this stuff up and sometimes that is all it needs for the power locks to work. Also you can get broken wires at the boot between doors.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks