Installed a new window regulator, and using the buttons it goes up, but not down. I tested it for it to go up and now the thing on the window regulator that connects to the window is too high up. How do you bring it down? All other windows work!
Tapatalk is active for this site! Just go to your phone's store to download and install.
Installed a new window regulator, and using the buttons it goes up, but not down. I tested it for it to go up and now the thing on the window regulator that connects to the window is too high up. How do you bring it down? All other windows work!
Last edited by max95xj; 06-21-2015 at 11:05 AM.
Is it getting current to the motor? Sounds like it isn't. You can jumper it directly. The switch just reverses the + and -
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Yea it works going up. Just not down. I tried to use a door lock button switch on it and still the same. The switches on the driver door for the passenger window has the same effect (not going down).
I will try the battery directly to the regulator and see if it goes up and down. I assume if it does go down then there may be a bad wire leading to the regulator somewhere????
I think it would be a problem with the switch. There are only two wires and the switch reverses the polarity in the two wires
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
I tried it with a switch from the door lock and the switch on the driver's side and still the same thing (doesn't go down when pressing down). Is there a way to test the switch???
Bookmarks