Swapped in a known good working transfer case...Same noise. Narrowed it down to the front axle I had rebuilt,lots of metal in the lube and on the magnet I put in there. Rear will have to come apart again.Probably new bearings and races again.
Tapatalk is active for this site! Just go to your phone's store to download and install.
Swapped in a known good working transfer case...Same noise. Narrowed it down to the front axle I had rebuilt,lots of metal in the lube and on the magnet I put in there. Rear will have to come apart again.Probably new bearings and races again.
Man, you and 07Negative are both having gear problems from vendors.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Yup it sux.
Well front axle is fixed. Pinion race and bearing was the culprit. Noise transmitted to the t-case through the driveshaft.
Bookmarks