There is a 99 Wj at the jy near me and I need better brakes on my xj. What all do I need off of it?
Tapatalk is active for this site! Just go to your phone's store to download and install.
There is a 99 Wj at the jy near me and I need better brakes on my xj. What all do I need off of it?
To upgrade the front you will need the following. The knuckles, rotors and calipers minimum. There is a few things I would suggest to make the upgrade work better, and probably required too. The tie rod, which is a major upgrade. Get an over the knuckle flip kit for it since it hangs down and get the drag link, also required. If you want to retain the 5X4.5 bolt pattern on your wheels, you will need a spacer ring to weld on the knuckles and reuse your wheel bearings. And then you will have to drill that pattern into the rotors. I don't have a write up on this right now, but will in the future since we have a WJ here we are parting out into a TJ and my XJ. But not sure when that upgrade will take place
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
I've already got the steering taken care of. I have a IRO steering kit with hiems so im gonna reuse that. I'll have to modify the knuckle a little because it's Rhd but I think I can make it work. Where is a good place to get the spacer ring?
Rusty's has them
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks