Here's a couple:
Sent from my SCH-I545 using Tapatalk
Tapatalk is active for this site! Just go to your phone's store to download and install.
Here's a couple:
Sent from my SCH-I545 using Tapatalk
That looks like a Johnny Joint. What color are the springs? What kind of shocks?
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Shocks are black, and may be the oem ones with spacers. Shocks are Pro Comps.
Here's the spring and shock.
Sent from my SCH-I545 using Tapatalk
Last edited by KMW-NWXJ; 06-21-2014 at 06:56 PM.
Ok, I just pulled one of the lower arms off. The bushing end has an inside diameter of 1.5" and is 2.2" wide.
Sent from my SCH-I545 using Tapatalk
Those joints have a snap ring in the other side?
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Yep, they do.
Sent from my SCH-I545 using Tapatalk
Johnny Joints for sure. If you want to rebuild those, then Currie is the ones that manufacture them and has the stuff to do that. Other companies have the parts too. My local 4X4 shop can get the stuff for that too
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks