Iam wanting to know how to install a power window motor and regulator ? Does the regulator mount to a bracket on the window
Sent from my SAMSUNG-SGH-I537 using Tapatalk
Tapatalk is active for this site! Just go to your phone's store to download and install.
Iam wanting to know how to install a power window motor and regulator ? Does the regulator mount to a bracket on the window
Sent from my SAMSUNG-SGH-I537 using Tapatalk
I have a thread on this, but unfortunately it is for the pre 96 XJs. After removing the panel you will notice it is riveted to the door and has arm that attaches to the bottom of the glass.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Are the newer ones riveted in ? Hope not
Sent from my SAMSUNG-SGH-I537 using Tapatalk
I don't know for sure, but I suspect they are. The rivets are 1/4" pop rivets that you have to drill out. A cordless drill with a 1/4" bit works well
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
The door has to bars to make it go up and down right regulator arms ?
Sent from my SAMSUNG-SGH-I537 using Tapatalk
I have never had one apart. The closest thing I have to go on is a grand cherokee out back. I could look a little closer when the rain quits tomorrow
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Yea I just hope the guy that sold me the part from ga junk yard took all the stuff I need
Sent from my SAMSUNG-SGH-I537 using Tapatalk
Maybe ill do a post of a before and after
Sent from my SAMSUNG-SGH-I537 using Tapatalk
can you tell me whats wrong with this picture and what do I need to fix it the gear that goes into the regulator is to big and dont the gear go inside of the regalutor ?
Sent from my SAMSUNG-SGH-I537 using Tapatalk
Got a pic of the whole thing? The one in your hand looks like the early style
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks