How can i tell what axles and the gear ratio and spline my jeep has i have a 2001 xj 4.0l automatic with np231 transfercase
Tapatalk is active for this site! Just go to your phone's store to download and install.
How can i tell what axles and the gear ratio and spline my jeep has i have a 2001 xj 4.0l automatic with np231 transfercase
Axle ratio unless someone has changed it is 3.55. Is there a flat spot on the bottom looking at the rear of the rear diff? Do you have ABS brakes?
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
If you want to, post a pic of that pumpkin and we'll have no problem telling you the axle and spline count.
Sent via messenger pigeon - i talk, he types.
I will post a pic of my axle in a lil bit it does not have abs
No abs and a 2001 automatic, safe bet you have a 29 spline Chrysler 8.25 with 3:55 gearing. Fun part will be opening it up to see if you have limited slip
Sent from my Samsung Galaxy S4 because my microwave couldn't do it
Yup
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
The first 2 pics are of my rear diff the 3rd puc is the front diff
I posted pics let me know thank you.
Yep, 8.25 rear, d30 front
Sent from my Samsung Galaxy S4 because my microwave couldn't do it
Like Jim said, its an 8.25. And if its original it will be the 29 spline.
Sent via messenger pigeon - i talk, he types.
So i want to get a good sye kit and driveshaft and lockers what are good brands
Or i should say a good setup
Lokka.com for the cheapest lunch box locker
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Ive looked areound and rugged ridge has a sye kit and driveshaft for around 400 is that a good brandand price
Do u use a lokka
Bookmarks