Alright I wrecked my jeep yesterday after noon and I need help or advice putting it back together
Tapatalk is active for this site! Just go to your phone's store to download and install.
Alright I wrecked my jeep yesterday after noon and I need help or advice putting it back together
Probably need some more pictures, but I believe we've got a couple of members that have fixed damage as bad, or worse.
Alright I will be getting some more it was the jeeps madein voyage for the trails to
ahh shell buff out ...yeah more pics
keeping it red........
I DRIVE A BARBIE JEEP
Originally Posted by bigjim350 View PostOriginally Posted by XJ4IV
Think I would go that crazy too if my Jeep turned white
http://www.youtube.com/watch?v=XGg0C...eature=related
Yup, specific pics. As long as the front frame is straight, the average person can fix them
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
US Army 2005 - 2014
US Army Reserves 2014 - Present
2001 XJ Limited 4dr I6 Auto.
"Stand your ground. Don't fire unless fired upon, but if they mean to have a war, let it begin here!"
Capt. John Parker, Lexington militia
Alright I will have specific pictures and yes it will need duck tape lol
Maiden voyage? So what happened?
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
I was on the trail going out to the parking lot and I new I if I went slow threw the hole I was stuck I got on it a little bit to hard caught a rut and threw me in the tree my radiator is bent every way but straight it dosnt leak she got her self out of the hole and off the trail and back on the trailer it didn't do to bad for stock jeep lol
Sounds fixable then
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
It bent the tore the inner fender all the way back to the coil mount tho
Most of that is spot welded to the frame. It can be replaced. And it is a three piece unit. You will have to drill spot welds to remove it. There is a tool for that
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
New fenders, hood, core support, header panel and trim.... all readily available parts, and all bolt on.
5" lift, 33's. Armored, Lighted, Chipped, & Locked up Front. Soon to come: winch, gears, axle shafts, and more...
Built Not Bought - Senior Member
TheVoiceofJosh.com/
Would there be anyway to make a tube cage around the engine that I could connect to when I put a cage in it
Sure. The best place for info on that one I think is NAXJA Jeepspeed section. They are required to have full cages and tube to the front
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks