What's the best way to get rid of tie rod roll?
Tapatalk is active for this site! Just go to your phone's store to download and install.
What's the best way to get rid of tie rod roll?
Do you have aftermarket steering?
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Its stock except for I used a LHD drag link to flip everything to the top of the knuckles. Everything is tight and new except tie rod. All replaced about 3 months ago
You probably don't have tie rod roll then. I suggest that you may only need to adjust your steering box
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
I had someone turn the wheel back and forth and watched the drag link roll and pull the tie rod around with it. I used the adjuster between the drag link and the tie rod for the pitmon arm and put the steering in a bind and it took about 95% out. I'm just gonna come up with some money and replace the whole steering with otk setup or something stronger than stock
Well I just ordered the iron rock Otk system. Hopefully it will be here by the weekend
Bookmarks