I have search to no end and cant find anything useful. How do I remove the e clip for the rear brake hose and install the Rough Country z bracket. And yes I know I should just buy longer brake lines but I'm budgeted out.
Tapatalk is active for this site! Just go to your phone's store to download and install.
I have search to no end and cant find anything useful. How do I remove the e clip for the rear brake hose and install the Rough Country z bracket. And yes I know I should just buy longer brake lines but I'm budgeted out.
I use a pair of channel lock pliers with an angle head. Grab on to the tab and pull while wiggling from side to side.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Well I got the hose loose from the e clip but said screw the z bracket and carefully bent the brake line down. Really don't understand how that z clip gives you extra length.
Is the line hanging loose?
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
I picked up a new rear line from autozone for a 95 Dakota for 20 and it is a lot better than there relocation bracket. Even at full drop I still have lots of play. With the bracket I couldn't drop it all the way
The hose has quite a bit of slack, but not sure what you mean by "loose". I mean it is still connected to the hard brake line and to the other end on the rear end.
I just wanted to make sure the ends were secured
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks