Has anyone put a lift on a right hand drive Cherokee? Used the search and couldn't find anything
Tapatalk is active for this site! Just go to your phone's store to download and install.
Has anyone put a lift on a right hand drive Cherokee? Used the search and couldn't find anything
yep what do need to know.....im down under in nz all cars rhd....
keeping it red........
I DRIVE A BARBIE JEEP
Originally Posted by bigjim350 View PostOriginally Posted by XJ4IV
Think I would go that crazy too if my Jeep turned white
http://www.youtube.com/watch?v=XGg0C...eature=related
I was told rough country 4.5" lift will work but I need to find out where I can get a track bar for it and I need to know if there is gonna be any other special parts I'm gonna need since its rhd
couple of guys down here have had them made down here.....i got my lifted rugged ridge from over there and straight built up...if ya goona play around with panhard rod they be differnt but no need to ...some local fab shop should help...
keeping it red........
I DRIVE A BARBIE JEEP
Originally Posted by bigjim350 View PostOriginally Posted by XJ4IV
Think I would go that crazy too if my Jeep turned white
http://www.youtube.com/watch?v=XGg0C...eature=related
How much lift you going to run? And what are your skills?
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
4.5" with 33s. Was gonna do 6" with 35"s but I decided to go smaller so I can do lockers and 4.27gears. I've played around with 4x4s that have leafs all the way around. Just got a new Lincoln welder so I'm gonna be learning how to weld too.
Personally, I would just lengthen the track bar if it was me. But I would hate for you to try out your skills on something like a track bar. But if you get your skills up to the task, that can be done. But use some real good rod for that kind of stuff. Don't try doing it with 6011 or 6013. I use some stuff called Super Missile weld for that kind of thing, which will not let loose and has mort tensile strength than the material you are working with
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
I don't really want to make or modify that myself yet. And there is not really any machine shops where I live so I'm gonna probly have to order it
Hi mate I'm from down under Australia RHD and most of us are using a Dave Woodley track bar (woodersgarage.com.au) or ironrock make a rhd track bar
BRISBANE JEEP CLUB
I just found the one from iron rock. Thank you
Bookmarks