If I get coil springs that get me a 3" lift wud in b fine with shocks that came with a 2" lift?
Tapatalk is active for this site! Just go to your phone's store to download and install.
If I get coil springs that get me a 3" lift wud in b fine with shocks that came with a 2" lift?
The only way to know for sure is start measuring. Not all 3' springs or shocks for 2' lift are created equal. So measure the length of the spring and subtract 16" and that is how much longer than stock it is. Can't remember the stock length for the shocks but if you get that far I can come up with some numbers.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
The springs r 22 inches long
That would be 6" longer than stock. You sure those are 3" springs? Shocks need to be four inches longer than stock
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Thats wat the guy said
I might just stick with my 2" in the front
Bookmarks