thanks for the GLXJ post firehawk. Never even heard of it before. Thanks
Tapatalk is active for this site! Just go to your phone's store to download and install.
thanks for the GLXJ post firehawk. Never even heard of it before. Thanks
Well here is what i did... Take a permanent marker and make an outline of the vents. Make sure you have them where you want them. I think used blue masking tape and taped around the marker. I cut it on the inside of the marker line. I needed to do a little more trimming but i figured a little more trimming is better than the hole being bigger than needed.
I covered the motor also with a towel. I didnt want any debris from cutting them to be able to get into the motor. I cut mine with the hood on also. Its not too difficult. If you can trace a line then you can do this. I used a cut off wheel on a die grinder. I kept the piece i cut out so i can put bolts through them and put them on during the winter.
I also sealed mine with Blue RTV. Dont know if it makes a difference but i did.
1993 Jeep Cherokee
6.5 in Rock Krawler long arm in the front(with 2 in poly spacers (springs sagged a bunch im sitting at 6.5 now with the spacers)
4.5 Rubicon Express in the rear with MJ shackles
Custom bumper with XRC-8 winch
33in BFG M/T
Aussie Locker(rear)
Dana 44 rear/30 front
Bookmarks