Re: 2003 WJ window regulator removal and install
What took a dump is a little nylon gear that wraps around that spring like cable. To remove the arm from the glass, you will find a big nut at the bottom. Remove that and you can raise the glass up or down to access what you need. Not sure about the WJ, but XJ regulators are pop riveted in with 1/4" rivets. You will have to drill the heads off with a 1/4" drill bit. To reinstall, I used 1/4X1/2" allen head screws and nylock nuts on the back.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks