Want 4.10 gears, HD Axles, lockers, let me know what you have. I even need a new housing to build up.
Tapatalk is active for this site! Just go to your phone's store to download and install.
Want 4.10 gears, HD Axles, lockers, let me know what you have. I even need a new housing to build up.
If you are getting a new housing, get one from a 4 cylinder from the junk yard. You will have the 4.10 installed and will be cheaper than buying new. Heavier axles will complete the parts unless you have need of a locker.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Thanks, I will look for one, that will save me some time. Do you know if anyone makes a better control arm mount/bracket? I was replacing tne bushings this week end and noticed that it was flemsy and would fold up if put to any real test.
Thanks
There are a number of companies and local 4X4 shops that market "bulder parts". Lots fo weld on tabs out there. Ballistic fab, Parts Mike, JKS I believe and 4 Wheel Parts to name a few, and certainly not an exhaustive list. They are usually called tabs. Make sure they are the right bolt size and will accommodate whatever ends you are using.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks