When are upper controls needed. And 4.3xj I talked to superlift and they said 4 inch will work with the shocks so 4 inch it is but do I need upper controls and longer brake lines what do I need different from the 2.5 lift to 4 inch
Tapatalk is active for this site! Just go to your phone's store to download and install.
When are upper controls needed. And 4.3xj I talked to superlift and they said 4 inch will work with the shocks so 4 inch it is but do I need upper controls and longer brake lines what do I need different from the 2.5 lift to 4 inch
You need a longer rear brake hose for sure. I think the YJ brake hose works. You need to relocate the attachment of the front hoses on the frame or get longer ones.
Last edited by 4.3LXJ; 01-03-2012 at 05:30 PM.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Adjustable trac bar wouldn't hurt would it. What about drop pitman arm
You won't need a drop pitman arm. You should only use those if you have a dropped track bar mount to go with it.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
If I have 4 inches up front i want 4 inch lift leafs in the back right? Because in the 4 inch super lift kit it comes with 2.5 leafs and 4 inch coils
Bookmarks