Re: repairs on my leaking seals and shocks are going bad, need help please.
Will, the u joints are the Spicer 1310. Try a NAPA store for those, they should get them right. When you go for your tcase seals, make sure you give them the number located on a tag at the back of it kind of in the center. There should be a number on it, such as 231J or 242. Also the low range ratio is on there of 271. The best way to fix the stud issue is to remove it and substitute an upper stud mount from a front shock from a C or K series Chevy Pickup. You will have to remove the stud and drill a hole. The new stud has a nut on the back of it. If you cannot find one at a wrecking yard off a pickup, then I can give you a monroe part # for a new one.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks