1992/1993 transfer case swap help!
Hello, I swapped the transfer case out of my 92 xj with one out of a 93. Both are 231's. Both were exactly the same with the exception of the one plug on the tail end of the transfer case that sets on top of the housing where the rear driveshaft is. I can't remember right off which was which but one was for a 2 prong set up and the other was a 3 prong set up. I did not notice this until after it was in and that was the only thing left to hook up as far as wires go anyway. What's the easiest was to fix this issue? Thanks in advance!
Anything that will break, will break on me!
2000 xj limited 4.0 ho, automatic
open d35 (for now) 3.55s
open d30 (for now) 3.55s
rc 3" leaf springs, adjustable 1.5" to 2" shackles
re 4.5" coils up front
rc hd trac bar and bracket
rc hd adjustable lca's
rustys throttle body spacer
rugged ridge 1.5" wheel spacers
air aid cold air intake
mossy oak seat covers and a decent sound system
more to come soon
Bookmarks