OEM Keyless Entry install?

[HPI_Savage25]

You should be able to program the fobs yourself....I use to work at Ford and we did them all the time on used cars that came in for resale. You just have to figure out the sequence to get it in training mode. I know on the fords you cycle the key on/off 8 times. Leave it on the 8th time and press the lock/unlock on your old remote then do it to the new remote. I believe you can do it straight to a new remote also. Can't remember exactly. We would know when they were in so called training when the locks would lock/unlock on the 8th cycle.

[Sneedle Vision]

Well after doing some scrounging I found that the circuit board is located in the dome light housing.

So you only have to take out the dome light lens, unscrew 2 screws, slide off the dome light housing and plug in the new circuit board. It doesn't look to be as difficult as I imagined it to be.

I will post some pictures once I get the parts in.