Project: "Rigor Mortis"

[4.3LXJ]

I am liking that cage Dana

[Pookapotamus]

Thanks Steve, and man I have been away too long! Have no idea what I was up to or planning! Have to make all new plans!

Think I should finish the bodywork and paint first.

Sent from my iPhone using Tapatalk

[4.3LXJ]

Ah body work, I usually leave that to last. I have been investigating vinyl wraps lately. I think I have found one I like. It seems easier to do than paint, cheaper too. I always get runs

[Pookapotamus]

Well in typical pook fashion, I have decided to pull out everything I did and start over, AGAIN!

This time I have decided to move the ecm under the dash along with the the main fuse block and delete the firewall mounted, pass-thru internal fuse block. Also re-mounting the dual oil filters and weld up all the holes in the engine bay. Going to pull the windshield again and make damn sure that silly leak I had is fixed. And of course make sure all the rust on the floor is fixed along with cutting out some of the tranny tunnel to stuff the muffler up even higher.

So once again another massive project!



Sigh! Somebody send help!!!


Sent from my iPhone using Tapatalk

[4.3LXJ]

Poor Mort, but he will feel much better when surgery is done

[4.3LXJ]

Are you still looking for a 32 pin ECM plug?

[Pookapotamus]

Was just looking for new pins for it.


Sent from my iPhone using Tapatalk

[4.3LXJ]

IIRC I got some from NAPA

[Pookapotamus]

Sweet I will look into it Steve.




Sent from my iPhone using Tapatalk

[Pookapotamus]

Ecm and fuse block mounted just left of the steering column.


Sent from my iPhone using Tapatalk

[4.3LXJ]

Cool. Should have originally been on that side anyway

[Pookapotamus]

Shit I meant just right of the column


Sent from my iPhone using Tapatalk

[4.3LXJ]

And here I was thinking Mort was dyslexic.

[Pookapotamus]

Got the remote filters mounted in a much better spot today, then found out that yellow tremclad is an almost perfect match!


Sent from my iPhone using Tapatalk

[4.3LXJ]

So it is