Leaking Clutch Master cylinder

[4.3LXJ]

Bleeding procedure is to crack open the bleeder valve. Get someone to push the pedal down. Put your finger over the end of the bleeder and then get your partner to release the pedal. Repeat until you get no air bubbles out of it then push down one last time, tighten the valve and release the pedal. If successful you will have full pedal then.

[88AMCOMANCHE]

I did this...problem is.when i push the pedal, it goes to the floor with just about no resistance. So the fluid just drips out the bleeder valve. If the pedal is pumped about 50 times it will have maybe a half a pedal,then it will drip out with a little more pressure. but then i topoff the reservious . But Im not gaining any pedal ...still goes right to the floor,after 50-ish pumps then it might have a little pedal,very next pump goes to teh floor though. Im on the brink of selling this POS just about. Ive redone everything that needed redone for the last year & This leak problem is just about got me there.