Project Mass.Build 92 XJ 4.5" RC LA!

[vwfoolwhy]

Here are a few PICs of the RC 4.5" Long Arm.

Trans Cross Member. "Very Well Built" One of the best I have seen.








TC Skid Plate. This as well is very built but the attachment points are a little questionable. We'll have to see about this over time.


Adj. Trac Bar w/ Drop Bracket: The bar it's self is not the beefy est I've seen but not the worst. The Bracket is very well made and should stand the test of time.




Lower Long Are: Very well built The Joint is not one of the best I have seen But RC has been working on these and always stands by them so we'll just see how they go.


If all else fails I'll replace with Ballistics's.


Upper Adj. Arm. The arm is well built but feelings are the same on the joint.




Front Coil: What can I say about them RC Has not let me down in the past in this department.


Rear Shackles: This will give me about 1" of lift more in the rear and are Adj. up to 2.5" I plan to run the rear a little higher due to towing and the rate of sag.


Rear springs: Not to impressed, not well packed with isolators. Might break down and install Teflon isolators for wear and flex improvement.


These are the main parts to the kit. If any one wants more detailed pics or dimensions feel free to ask. As well as pics of the other parts and hardware.

[vwfoolwhy]

Drop Pitman Arm: Very well Built


F/R RC2.2 Shocks: Always ran the cheaper RC shocks and had no problems so we'll see how these do.


Quick Discos: Only ever ran ones I made so we'll see about these ones.




Front SS Brake Line: Look really nice.


Rear: