Ok I'm confused here.....

Here's my exhaust bracket:


Daystar says if the exhaust bracket is between the crossmember and tranny support bracket, use the 3" mount. Mine is obviously in between. But here's the thing that's confusing me. The 3" mount is not listed for my 2001 AND the distances between the outside transmission-side bolt and crossmember-side bolts are the same on both sides of the bracket.

Here's the 3" mount:



Notice that the tranny bolt hole is less than an inch from the crossmember bolts on one side and further on the other side. My tranny bracket has both sides evenly spaced at 2" apart.

This makes me think I need this mount:



Cuz both transmission bolt holes are evenly spaced away from the crossmember bolt holes and this one lists 2001 models.

My stock mount from crossmember to transmission support bracket is about 2" high.

So which one do you think I should get?