stabilizer is a year old but is still solid and tight. I have been checking all the measurements and have come to the conclusion that my camber is way outta wack. I need to get longer/adjustable lower control arms because my axle is rotated forward to much causing it to make the tires go floaty chasing all over the place. I read a few hundred articles from every jeep forum I could find and found that if the axle is rotated to far forward that it will cause wandering. Found it on naxja if I remember right. I'm supposed to be somewhere in the 4.5-7.5 degree range (varies on who you ask) and mine is setting at 9 degrees was at 10.5 degrees but I shimmed it to the max today and it did help but I cant adjust anymore. More research led to the correct measurments of the lower control arms and mine are about an inch to short for the lift setup I have.