Re: Adding a inch to my lift kit
My rule of thumb is to not go over three inches of lift with stock arms. Once you do that, you can run into castor problems and have lots of death wobble problems. 3" is as good as it gets with budget kits. Once you pass that magic number, you have to start shelling out the bucks for more hardware.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks