Building the ultimate Dana 44?

[4.3LXJ]

These studs are OEM for the studs for the top of the shocks for Chevy pickups 2 and 4WD. They just unbolt. These are black because I soaked them in white vinegar to remove the rust. I made a simple box to weld to the axle and then tacked the nut on the inside. This is also a fix for the lower shock studs on an XJ rear axle if the stud gets damaged.

The next thing to consider is the trailering of my XJ. Not a common occurrence, however since I always do it alone, I bent some 3/4" rod and welded it on for chain or strap attachment points. The idea is to attach the chain to both loops and drive the Jeep on the trailer until the drooping chain is caught on a welded on hook on the back of the trailer