You may have noticed some leaf spring pads on the axle housing. These are temporary to bolt to the existing leaf springs until I get all the frame stuff needed to run a three link. But the ultimate goal is to link the back, so there is a top link mount mounted on the truss.

Name: IMG_1903_zpsufkudrvq.jpg Views: 102 Size: 137.8 KB

Also, coils will be needed. I chose rear coils from an Aerostar van, which I have noticed is a very smooth riding rear suspension. Here is the basic setup as it stands now.



Name: IMG_1901_zpsz71sfjpi.jpg Views: 90 Size: 149.2 KB
Name: IMG_1902_zpsxj7vlmfd.jpg Views: 80 Size: 139.8 KB

The shocks I will be using are Monroe Gas Magnums, with 10 stage valving which I have found to be excellent on and off road for a smooth ride.