Tapatalk is active for this site! Just go to your phone's store to download and install.
|
Not registered as a member yet?
|
 |
|||
| Okay I get it you're not sure if we measure up yet. No problem look around and we think you'll find some good info and a lot of good people here all willing to help and not flame you when you ask a question. | ||||
 |
Super Moderator
Re: How to build a 3 or 4 link suspension
Now it is time to tack the bracket to the edge of the 4X16” plate. The center of the hole that is in the cross member should be lined up with a perpendicular line in the equidistant between the two holes in the plate and 1 ¾” up the bracket from the center of the hole. The idea is that the joint
which is just over 3” in diameter, or a 11/2” radius will not bind on the frame when secured.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Posting Permissions
Reply With Quote
Bookmarks