I wanted to add an easy way to wire accessories, this is what I came up with. This is the block off box to give room for the switches while blocking the vent. This shows it in place, neoprene was used for a gasket behind it so no leaks. Next I made a cover plate for the switches This is it with the cut outs, ready for the finishOK, now it is ready to put in, I used textured vinyl to match the dashNow it is in and ready to go, all wiring from now on is done under the hoodI think I need to show under the hood in another post, so I will try to show it right after this one.
Bookmarks