Went with Mustang (Bosh 0 280 155 715) 24# injectors... And the Dodge fuel pressure regulator (Chrysler # 4418850) @ 49psi "should be a good match" with my mods.
= 25.5lb/hr, 6cyl will support 240HP at the flywheel.
"The objective here is to select an injector that will deliver the correct amount (lb/hr or cc/min) of fuel required to support a given horsepower level while maintaining operation within its design parameters. While injector flow rate can be adjusted (to a limited extent) by pressure, (24# injector @ 43.5psi will flow 25.5# @ 49psi) the PCM controls the amount of fuel delivered by adjusting how often and for how long to open and close each injector."
Bookmarks