Mine was missing.
I cut a piece of 3/4" pipe and welded to a foot long 3/8" rod and bent the rod to fit and welded it up to the pipe. 3 years and holding. My pipe going thru the cross member is 2" from anything...no rattle.
Tapatalk is active for this site! Just go to your phone's store to download and install.
Mine was missing.
I cut a piece of 3/4" pipe and welded to a foot long 3/8" rod and bent the rod to fit and welded it up to the pipe. 3 years and holding. My pipe going thru the cross member is 2" from anything...no rattle.
Bookmarks