Any cylinder head from 91-95 (7120 casting) or 96-99 (0630 casting) will work. The earlier 87-90 (2868 Renix casting) can be made to work but really isn't worth the effort ... BUT ... you will need the earlier style exhaust manifold as well. And have to mate it to the stock exhaust so grab the down pipe to where it crosses under the trans as well.
If you have Cali emissions you have to find a TUPY head or start swapping ECM's to allow use of the earlier hard and manifold.
Hang the coil rail off the valve cover using a couple home made brackets easily made with a hand drill and some steel, or aluminum strap.
My 2000 has had a 93 head on it for the last 100K kms ... or about 10yrs or so ish.

Sent from my SGH-I337M using Tapatalk