Re: Engine Swap 4.7 Stroker vs 4.0 Replacement!
What I would do on that is transfer all sensors to the new intake. If you have to drill and tap, do it. Then you will not have to change anything else. Also, I would use the original throttle body with sensors and IAC, only bore it, or get one already bored. With all that stuff you should be hitting at least 210 hp
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Bookmarks