I made a shopping list for the terminals I'll need..

Its not perfect. The stock fusebox has some terminals which I cant find for sale, specifically the two-wire terminals and the bus bars that take 20, 18, 16, and 14 gauge.

But I think I can make do with just the 12, 14-16, 18-20 individual terminals, and the 12 bus bar terminal.

From mouser, 10 of each of those terminals, plus a full set of brand new fuses, is about 25 shipped. Im confirming with them that the bus bar terminals are left as a continuous strip and not cut apart.

The part numbers I'm using come from the waytekwire website, which shows the dorman fuse block I bought, and the terminals that fit it. Delphi makes a zillion terminals which are similar and I figure I would use the ones that waytekwire says fit the dorman, because I know the dorman terminals fit the stock fuse box. Yes, I tested the individual one. It popped in just fine, and I popped it back out easily with a flathead. I didnt test the bus bar one yet though.