Like the title says getting ready to pull the engine out of my 2001 xj. Have read the Haynes Manuel and watched a couple YouTube videos. Wondering if the brain trust here has any other things to add.
Tapatalk is active for this site! Just go to your phone's store to download and install.
Like the title says getting ready to pull the engine out of my 2001 xj. Have read the Haynes Manuel and watched a couple YouTube videos. Wondering if the brain trust here has any other things to add.
One thing I find helpful is getting the front as low as possible while unbolting everything up top. An easy way to do this is to flatten the tires, if you have air available of course. Then put it up on tall car stands to get underneath.
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
The two top bolts on the bell housing are inverted torx replace with normal bolts. Swap is pretty straightforward.
91 aw4 Dana 30 and 8.8 with 4.56s, 6in rough country long arm kit, hd offroad shackle relocation, 33s, Va fan full width front bumper, brown dog poly motor mount to go with a fresh long block.
Bookmarks