DanXJ97,

I have had an Aussie locker in both front (Dana 30) and rear (Chrysler 8.25) for years. They wear very well. The rear is a little bit clunky in turns on road, like and auto locker in a rig with a manual transmission.

I re-used the cross shaft in both. After 4 years and 100,000 miles, the rear seemed to be locking and unlocking on the road more frequently than usual. I opened it and checked everything according to the Aussie Locker instructions. I found that the stock cross shaft was showing wear. I replaced it with an aftermarket shaft from Yukon and its all good as new again.

I can't fins anything bad to say about Aussie Lockers.