Results 1 to 5 of 5

Thread: Why

  1. #1
    Join Date
    Jun 2014
    Location
    Portland OREGON
    Posts
    6

    Default Why

    So I have never had this porblem befor but I have 90 jeep
    I have front lights running light but no dash lights and running brake light when the brake paddle is pressed I have tail light but no day time lights why is this

  2. #2
    Join Date
    Sep 2013
    Location
    Short Pump Va.
    Posts
    107

    Default Re: why

    I had the same issue, turned out to be a blown fuse.
    I used to build Jeep XJ bumpers...

  3. #3
    Join Date
    Jun 2014
    Location
    Portland OREGON
    Posts
    6

    Default Re: why

    I've checked all the fuses in there fine all the relays in there fine I think it's in the light switch on a 100 percent sure yet but I'm going to check into that Next

  4. #4
    Join Date
    Jun 2014
    Location
    Portland OREGON
    Posts
    6

    Default Re: Why

    so i changed the light switch and its still happening now only i am melting fuses one days its going to brun to the ground if that happens im going to be super upset but i was wondering if any one had any tips on water porfing the fuse box olz any insite would hlep alot

  5. #5
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: Why

    If the fuses are going, then you have a short that you will need to find. You just have to trace it down
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •