I just don't see how the housing can be damaged like this. I really think it is the axle rod being pitted or so.
So what happens if I put this fancy new bearing into a not perfect housing?
Tapatalk is active for this site! Just go to your phone's store to download and install.
I just don't see how the housing can be damaged like this. I really think it is the axle rod being pitted or so.
So what happens if I put this fancy new bearing into a not perfect housing?
Probably the same thing
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
So maybe I should just get a new housing then?
Robert, I can't tell that from here. Put a straight edge against it and see if the tubes are true. That is all I can tell you, and is what I would do if it were me. But unless you have hit something very hard, that is not likely the case
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
I will show a picture of the bearings with the inner race to my mechanic and see what he says. We shall see.
Thanks
For all your help
Bookmarks