Wanna go bigger

[Hopkins]

How big of tires do you want to run?

You can run 37s with an 8 inch lift and proper trimming, but I would say 37s is the absolute max tire size I would run on factory axles and that's with chromo shafts and trusses. Prob wouldn't hurt to gusset and sleeve either. With the axles built correctly I think they could handle 37s without too much carnage as long as you had a stock motor and were smart with the skinny pedal.

Anything bigger and your going to need stronger axles, and at that point full width axles are gonna do the job better anyhow. They would be a much more stable base with that high of a lift.

If your dead set on 10 inches of lift, an 8 inch lift plus shackle relocation brackets in the rear and coil spacers up front will get you there.