Around 12 liters I think. But that is if you have completely drained the block. There is at least a half gallon that you cannot get out from the water pump by pulling the intake hose
Tapatalk is active for this site! Just go to your phone's store to download and install.
Around 12 liters I think. But that is if you have completely drained the block. There is at least a half gallon that you cannot get out from the water pump by pulling the intake hose
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
US Army 2005 - 2014
US Army Reserves 2014 - Present
2001 XJ Limited 4dr I6 Auto.
"Stand your ground. Don't fire unless fired upon, but if they mean to have a war, let it begin here!"
Capt. John Parker, Lexington militia
Alright thanks guys I'll go ahead and pick up another jug before I tackle this. One more thing. On the bleeding and flushing thread he puts in prestone flush fluid first. Do you put the flush fluid on top of the old coolant or should I drain everything first then fill up with flush fluid and water?
Sent from my SGH-T679 using Tapatalk 2
Drain the old then put in flush and water. Make sure to secure the old fluid and dispose of properly to keep animals out of it.
Sent from my XT907 using Tapatalk
Last edited by drakan1908; 01-19-2014 at 07:14 AM.
Bookmarks