Okay to lazy to search for it, so here goes. What have you done to keep your floor from getting so crazy hot? Also lots of heat in the space under the ash tray area in front of the gear shift.
Tapatalk is active for this site! Just go to your phone's store to download and install.
Okay to lazy to search for it, so here goes. What have you done to keep your floor from getting so crazy hot? Also lots of heat in the space under the ash tray area in front of the gear shift.
DIVE NOW.....Work later!!!!
You can pull the carpet and install some insulation from an automotive store.. or you could pull the carpet and spray some bedliner under it... and/or spray some underbody spray on the bottom of the trans tunnel...
FORMER GREEN XJ CLUB MEMBERIF YOU DON'T STAND BEHIND OUR TROOPS, FEEL FREE TO STAND IN FRONT OF THEM!!
DOING SOMETHING JUST BECAUSE YOUR BUDDY DOES IT THAT WAY MAKES AS MUCH SENSE AS SHARING TOOTHBRUSHES
A proper oil cooler for the AW4.
Get the best airflow you can, through the engine bay/tranny tunnel at all times.
Some heat shields and matting would also help.
Not a lot of space under the XJ ... so things are jammed fairly tight against the body.
I hate watching simplicity and reliability being ruined by bureaucracy and technology.
Originally Posted by MattybPDX
Factory carpet and pad are the biggest thing
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
Check to see if the heat shield for the catalytic converter is still there, if thats missing the cat will add alot of heat to the floor.
There are no rocks, log trails or public land here so I’m building a mall crawler... Dawn of the Dead style!!!
Bookmarks