Before you do that, just for giggles remove the inner door handle and try to operate the rods that go back to the door mechanism. I suspect that they may be locked. That both handles would be inoperative on both sides is a little suspicous
Tapatalk is active for this site! Just go to your phone's store to download and install.
Before you do that, just for giggles remove the inner door handle and try to operate the rods that go back to the door mechanism. I suspect that they may be locked. That both handles would be inoperative on both sides is a little suspicous
230 hp 4.3L Chevy
Built 4L60E with manual lockout
Atlas 4 speed
Griffin radiator
On board air
Warn 9.5ti on custom bumper
7.5" RE front and bastard pack rear on custom long arms
30 gal gas tank
lockers
And a bunch of other stuff
does your key work to lock and unlock the door then if it move the locking rod all the way.if it moves all the way try both inside then outside handles do you feel any resestents like them are stell hooked up if not then you will most likly
have to remove the inside door planel. roll the windol down then remove all the faseners that you can.you will have to ben and flix the door panel. if you can find a warm place it may help alittle. and you may brake somethings.good luck
Bookmarks