Crossed electrical? Please help

[LostMNJeep]

@Carves - thanks for posting the grounds schematic - I've been trying to find a comprehensive list of grounds to check. I did go through and re-seat other grounds I found (under the hood, under the seats, etc) but it seems likely that when I started taking the dash apart I pulled something loose and should focus my attention there. I'll get going on the ground work today and update tonight if I come up with anything. Luckily I have the day off tomorrow too to dink around with this frustrating ordeal.

[LostMNJeep]

UPDATE and QUESTION:
So today I gave up on finding the CCD lines/grounds so I replaced some bolts that kept the dash to the frame/firewall (4 bolts and 2 nuts)... For the past 4 weeks I've just had the dash hung up on the frame studs and 2 bolts below next to the shifter.

The reason I bring this up is that now all the electrical problems are fixed! Is it at all possible that those bolts acted as ground somehow?

Yes, I'm a noob, but thought I knew how to fix SOME things.

[4.3LXJ]

Yup, sounds like you reestablished the ground

[Carves]

Good that its all sorted ...

and yep ... if the ground points are on any framework ... that framework needs to be secure to the veh body.

[LostMNJeep]

Thanks again to everyone that chimed in to help - I'm not surprised that no one thought to ask about the mounting bolts to the dash to the frame - I mean, who would be stupid enough to drive around without their dash bolted down?