Pretty common problem on the D30 axles. I welded mine but before I did I heated them up with a torch just a bit to ensure the weld sticks as it is cast metal.... I think
I heard of people using...
Tapatalk is active for this site! Just go to your phone's store to download and install.
Type: Posts; User: JBone; Keyword(s):
Pretty common problem on the D30 axles. I welded mine but before I did I heated them up with a torch just a bit to ensure the weld sticks as it is cast metal.... I think
I heard of people using...
Anyone know what to do about the passenger side upper control arm axle bracket that wont hold a new bushing? I think its the major cause of the noise I hear.
Ah, I got it. So on the knuckle, look for a worn spot. Thanks for the replies. Appreciate it.
What would be worn out? The caliper or the knuckle? Hope its not the knuckle. Would be a ball buster to replace that.
Where the pads rest? Or caliper?...
So I've done a lot of work on the cheap ZJ I bought about a couple of years ago. I've been chasing a clunk noise in the front end. I've replaced all control arms and bushings, sway bar links, sway...
Woohoo! Got my call sign today, KC1ECP.
73
ouch! that's pricy $ I'm a cheap HAM hahaha
Now that sounds like a great mobile rig. Try to remember what brand it was so I can look it up :) I'll look around on that site you posted.
I found 4 IRLP repeaters in my area using an Android app call IRLP Finder. pretty cool app.
Well I have a Boafeng UV-82 HT right now that I've been listening to for a while. Been looking for a mobile rig but not sure on what brand. Seems like the IComs, Kenwood and Yaesu are out of my price...
Just passed the Technician test this past weekend during the HAM field day. Don't have my callsign yet. My plan is the same as NW99XJ as well as the reasons.
73
Thanks guys, I will be getting it. I'll post pics of it when I get it.
Oh and I ran the Vin # and its not a flood, salvage or wrecked Jeep. No accidence reported. Clean report.
I bet your right about there being a mouse in there that either ate the wires or the injector or the vac line because I found a rat nest under the air filter.
Thanks for the replies guys. Keep em...
I'm looking at a cheap, I mean really cheap ($350) 1998 Grand Cherokee ZJ with a 5.2L. It has 138K miles on it and its been sitting for a year. It will need a cat back exhaust, has Trans, TCase and...
There is a way to start the engine jumping the starter solenoid but I cant remember. I had the same issue with mine. Turned the key, lights and chimes start but when I turn the key to start engine...
Sweet! Now off to order parts :)
So I want to lift my XJ 3 inches. The front is really easy. I'm going with a Rusty's 3" coil spring (STD 150#). The rear I was thinking about doing a S10 bastard pack using the main leaf from the S10...
I recently had a similar issue but my rear wiper AND license plate bulb was out. Ended up being a broken ground at the boot where the wires come from the body to the liftgate.This is common as the...
Actually its a cable that runs from the ignition cylinder to the shifter. I had to replace my ignition switch box (one behind the ignition cylinder) and noticed that this cable had a little plastic...
Ok so I traced it down to the connection at the blower motor. The connector must have been melted so the previous owner(s) instead of fixing the issue used RTV to make the plug stay in-place. Over...
Thanks 4.3LXJ, I'll bring it up to my buddies garage tonight and test it. Got a big snow storm coming tonight so I got to get this fix.
Yup the heater fan is not working and needless to say its very cold here in the northeast. This morning I replaced the fan relay and still no operation at any speeds. Could it be the control switch?...
Man you guys had me going there for a few minutes. I didn't want to see the XJTalkShow go away. (phew, wipes sweat off forehead). have a great vacation guys! love the TalkShow!