How much torque for control arm?

I'm getting ready to replace the bushings in my control arms. (upper and lower) My hayes manual does not have torque settings listed.
A quick search came up with very inconstant results one site said 55lbs another said 100 lbs. Anyone have a clue? or am I being anal about something that really don't matter too much.

Stock control arms. with moog bushings.

I hit mine with My air impact. So there about 150 Or so lol

50 - 75# would be plenty. Remember how much goes on head bolts. You can strip stuff with too much torque

Here ya go ... You might want to scribble these on the back page of that Haynes manual.

Factory Specs:

Suspension Arm Upper
Front Nut . . . . . . . . . . . . . . . . 74 N·m (55 ft. lbs.)
Rear Nut . . . . . . . . . . . . . . . . . 89 N·m (66 ft. lbs.)
Suspension Arm Lower
Front Nut . . . . . . . . . . . . . . . 115 N·m (85 ft. lbs.)
Rear Nut . . . . . . . . . . . . . . . . 115 N·m (85 ft. lbs.)


Dont forget to have it on the ground when you tighten it all up. ;);)
.

Thanks guys.