Re: Wiring lights together
"wired to the battery" like through a relay?
all your lights and accessories should go through a relay. you can run them all to one switch if you would like, but you're going to toast switches pretty quick the way you have things set up.
also look into power distribution blocks for hooking up crap to the battery. wire the block up and start hooking stuff to the block.
Re: Wiring lights together
I guess I should clarify. I meant wired to the battery as in they powered and working. They are wired through the supplied harness with relay and fuse. I can snap some pictures once I get off work if that helps.
Re: Wiring lights together
makes sense. Check the amp draw for the harness, fuse and relay. Hellas max out at 2 per 30A relay. do the math to see if you can add lights to the current harness, my guess would be no.
so add relays and use the current switch wire to control them
Re: Wiring lights together
Sorry I'm such a noob when it comes to wiring. Do you mean add a second relay? Would I still have to wire the leads to the battery until I get a power distribution block? I have a second identical harness that came with the lights so would I use that until the relay then splice it in to the switch wire and leads to the battery?
Re: Wiring lights together
I wouldn't use the same harness for all four if they are in fact 155w because the wiring and relay are probably no where near capable. So personally if you want the same switch to run all four you just have to wire up the second harness just as you would anyway and just splice in the wire from the switch as you mentioned. This way the load will be split between the two harnesses but the same switch activates all of them.
Re: Wiring lights together
I would be careful though....
Most relays are only good for 30-40 amps MAX...
So just make sure that each pair of lights has their own relay... both relays can still be triggered by a single switch though.
Re: Wiring lights together
If you are running out of room on the battery to connect wires, where the positive wire from the battery connects to the PDC (Power Distribution Center) there is a stud, you can also connect wires there. The PDC is the Fuse/Relay box close to the battery on the passenger side inner fender.
Re: Wiring lights together
Re: Wiring lights together
That's awesome. Good to know, thanks!! I've got a bunch of wiring to do this weekend i want to get my light bar harness in too so when my mount arrives it will be pretty much ready to go once mounted. :)
Re: Wiring lights together
The wiring kc supplies is 16 ga. You want at least 14 ga for 150W. 12 ga would be optimal. Another thing you could do, bundle the 16 ga. harnesses in a plastic sheath. It'll handle the amperage but still look clean.
Sent from my iPhone using Tapatalk
Re: Wiring lights together
http://tapatalk.imageshack.com/v2/14...f6da3ac53e.jpg
Thanks for all the help everyone! I ended up using the second harness wired to the PDC and i soldered the switch wires together so they use the same switch. You guys rock!